Panda Family Landscape Sculpture Set

This panda family set is a group of three to five fiberglass pandas in sitting, lying, and climbing poses, sized to your site. A typical adult panda stands about 150 cm tall, and a family group usually runs USD 4,500 to 12,000 depending on size and count. FibraCraft builds each set to order from your drawings or reference photos, with a mold cost of USD 1,200 to 1,500 per unique piece.

Design and customization

Send sketches, photos, or a simple dimension sketch and we will return a 3D layout showing pose spacing, sightlines, and base footprints. You can mix standing, sitting, lying, and climbing poses in any combination. Sizes range from a 60 cm cub to a 300 cm adult for a plaza centerpiece. Every unit is a custom fiberglass sculpture made from your approved design, so proportions, facial expression, and fur texture are set before tooling starts. We do not use stock molds or catalog characters.

Build and materials

The shell is marine-grade unsaturated polyester resin with chopped strand mat and woven roving, laid up over a welded steel internal armature. A UV-stable gelcoat and automotive-grade polyurethane topcoat protect the surface outdoors. Stainless steel hardware connects base plates and anchor points. Outdoor service life is 10 to 30+ years, with a repaint or re-coat cycle every 5 to 7 years. The steel armature is sized for wind load at your site and for climbing contact if the piece is interactive.

• Marine-grade resin and fiberglass layup for outdoor exposure
• Welded steel armature engineered to your wind and contact loads
• UV-stable gelcoat with polyurethane topcoat
• Stainless hardware and sealed base connections

Finishes, color, and installation

Color is matched to any Pantone shade at 98 percent accuracy, in gloss or matte. Fur is sculpted and painted in layers so the black and white read clearly from 10 meters away. Each panda ships with a steel base plate and anchor template. Most sets install in one to two days with a small crew and a lift for the larger pieces. We provide anchor layout drawings and a site checklist before shipment. For fixed installations, the base plate bolts to a concrete footing sized by your engineer.

Budget and lead time

An itemized USD quote is ready within 24 hours, listing mold, production, finish, and freight separately. Standard pieces take 3 to 6 weeks; oversized or multi-piece installations take 12 to 16 weeks. Sea freight door-to-door DDP to the USA runs 5 to 9 weeks and costs about 80 percent less than air. Air freight is 7 to 10 days. Payment is 30 percent deposit, balance before shipment, with a 12 month warranty against manufacturing defects. To size your set and get numbers, request a quote.